Goji berry automatic tray filling machine
Category：Goji berry production line
Product Details
The working principle of the automatic filling machine is mainly combined with the technology of air energy high temperature heat pump dryer and automatic packaging technology. Specifically, it might include the following key parts and steps:
Heat source air energy heat pump unit: this is the core part of medley dryer, according to the principle of inverse Carnot cycle, the use of a small amount of electric energy to drive the compressor, the working medium in the evaporator evaporates into the gaseous state and absorbs the heat energy in the air, and then the gaseous working medium is compressed into high temperature, high pressure gas, in the condenser heat release, so as to heat the drying medium .
Automatic plate loading system: this part may include one or more conveyor belts, hopper feeding systems, to transport the berries from the storage area to the plate loading area. Then, is counted by a number sensing system (such as sensor, photoelectric system or image processing technology) .
Sorting system: according to the counting result, control the sorting device will be divided into the quantity of wolfberry according to the set tray or bag .
Intelligent control device: The whole process, temperature and humidity intelligent control device will monitor and adjust the drying and loading process of temperature and humidity, to ensure the quality and efficiency of wolfberry.
In addition, Lycium automatic tray loading machine may also include automatic moisture discharge device, thermal insulation room body device, drying room internal hot air circulation device, to further improve the effect and efficiency of drying and tray loading .
Please note that the above description is based on general principles and common techniques, the specific goji automatic plater may vary according to the manufacturer and specific needs. If you require more detailed information, is recommended to consult the relevant equipment manufacturer or supplier directly.
Goji berries before drying goji berries after drying
Key words: Goji berry automatic tray filling machine Fruit and Vegetable Processing Equipment
Prev： No more...
Related Products
Condiment Processing Equipment
Chili drying production line
-
handle-shears
Pepper drying and cutting machine is a combination of pepper drying and cutting functions of the equipment.
-
Screening sterilization line
-
Stoning machine
Hot pepper drying stone removal equipment is a kind of mechanical equipment specially used for processing hot pepper, it combines two functions of drying and stone removal, aimed at improving the quality and processing efficiency of hot pepper.
Sichuan pepper intelligent drying production line
-
Roller pepper screening machine
Zanthoxylum roller pepper screening machine is a kind of mechanical equipment used for screening and classification of zanthoxylum.
-
Sichuan pepper killing green line
-
Sichuan pepper killing green line
Pepper seed removal machine is a kind of mechanical equipment specially used for treating pepper, its main function is to help remove the seeds, stalk, leaves, dust particles and other impurities in pepper, at the same time to realize the separation of pepper seed and shell. The equipment is usually combined with vibration cleaning, cleaning, raking grinding, threshing, screening and other functions, aimed at improving the treatment efficiency and quality of zanthoxum pepper.
Star anise drying production line
-
Blanching machine
Energy and operation: The blanching machine uses electricity or steam as energy, and achieves precise control of blanching time and temperature through an automatic control system. This pressure-free operation ensures the safety and reliability of the equipment. Heat treatment process: The blanching machine can quickly remove green, inhibit enzyme activity to protect food color, while timely dehydration and cooling to ensure that food retains its natural color and flavor.
-
Intelligent control system
Ginger drying production line
-
Large polishing cleaning machine
Ginger polishing cleaning machine is a kind of equipment specially used for cleaning and polishing ginger, aims to improve the processing efficiency and product quality of ginger.
-
Brush spray cleaning machine
Ginger brush spray cleaning machine is a kind of equipment specially used for cleaning ginger, it combines brush cleaning and spraying technology, to efficiently remove sand and impurities on the surface of ginger.
Spice drying series
Fruit And Vegetable Processing Equipment
Jujube production line
-
Jujube product line - wind sorter
Jujube air sorter is a kind of equipment for screening jujube, it uses the method of wind impurity removal, through the difference between the suspension speed of materials and impurities, to remove light impurities and dust, at the same time can also remove some stones and dirt and other heavy impurities
-
Cleaning machine
Jujube cleaning machine is a multi-functional comprehensive cleaning machine, is specially used for cleaning and processing of jujube.
-
Grading machine
The working principle of the jujube grader mainly depends on the sensor to measure the jujube, according to its size, color, shape and other factors to determine the grade. The control box processes the data collected by the sensor, and divides the jujube into different grades according to the preset grade standard
Goji berry production line
-
Goji berry automatic tray filling machine
The working principle of the automatic filling machine is mainly combined with the technology of air energy high temperature heat pump dryer and automatic packaging technology
-
Goji berry cleaning wax breaker
The working principle of the lycium berry wax-breaking machine is mainly to use alkaline substances to dissolve the main components of the waxy layer of the lycium berry skin long chain aliphatic hydrocarbons.
Konjac production line
-
microtome
Konjac slicer is a kind of mechanical equipment specially used for cutting konjac. has the characteristics of low cutting knife speed, less slag, high flake rate, large yield, accurate slice shape and uniform slice thickness.
-
U-shaped cleaning machine
The main working principle of Konjac U-shaped cleaning machine is to place the material in a U-shaped hopper composed of several rolling wool rollers, so that the material and rotating wool rollers contact surface friction, so as to achieve the effect of cleaning peeling. In addition, clean water from the spray pipe is used to rinse the material, for further cleaning purposes. This kind of equipment can also be attached to the bottom of the machine waste collection tray, to prevent sewage dander and other contamination of the floor.
Melon seed production line
Walnut production line
-
Bubble cleaning machine
Bubble cleaning machine is a kind of mechanical equipment specially used for food processing, agricultural products cleaning, it generates a lot of fine bubbles through a specific way, combined with the action of water flow, to achieve a variety of food materials such as fruits and vegetables, seafood, meat and other efficient cleaning and purification
-
Stage roller grader
The stage roller grader is a kind of equipment used for separating objects it grades the material by rolling the roller. The working principle of the classifier is to drive the roller group to roll by a driving device. materials are separated by impact, friction, centrifuge and other forces during the rolling process of the roller. The regulating device can be adjusted according to the nature of the material and separation requirements for accurate grading.
-
Multi-unit drum classifier
The equipment adopts the working principle of contact internal heating conduction, through the wet material and the upstream or countercurrent hot air full contact, to speed up the drying heat transfer, mass transfer driving force, to achieve the drying of the material
Dehydrated fruit and vegetable production line
grader
Grain and Oil Processing Equipment
Camellia fruit drying line
Corn drying line
Grain and oil drying series
Chinese Herbal Medicine Processing Equipment
Platycodon drying production line
-
Intelligent control system
Automatic adjustment: intelligent temperature control equipment can automatically adjust according to the ambient temperature, without manual intervention, to achieve stable temperature control.
-
Slicing machine
The microtome is a kind of machine which is used for cutting material into thin slices. it has a wide range of applications, including the slicing of medicinal materials, food, cell tissue and wax and so on.
-
U-shaped cleaning machine
This equipment is suitable for cutting and cutting stems and leaves of Chinese medicinal materials. The shape of the cut product is regular and neat, the operation is simple, easy to use, the cutter head is easy to replace, and the manual cutting effect is maintained.
Raw rehmannia drying line
-
Stage roller grader
The stage roller grader is a kind of equipment used for separating objects it realizes the grading of materials by rolling the roller.
-
Herbal medicine cleaning machine
Drying equipment Medicinal materials cleaning machine is a multi-functional medical equipment, is mainly used for quick cleaning, drying and preservation of various small medicinal materials.
-
Drum cleaning machine
Rhizome of traditional Chinese medicine
-
High pressure vacuum moistening digester
High pressure vacuum moistening digesting tank is a kind of equipment which combines drying, vacuum moistening and cooking functions. is mainly used for drying, moistening and digesting materials.
-
Intelligent micro-negative pressure drying room
Intelligent micro negative pressure drying room is a kind of equipment that uses vacuum negative pressure technology to dry goods.
-
Large polishing cleaning machine
Flower bud type of Chinese medicine
-
Mesh belt steam cleaning machine
-
Multilayer Chinese herbal medicine sorting machine
Multi-layer Chinese herbal medicine sorting machine is a kind of equipment specially used for drying and sorting of Chinese herbal medicine, it combines the functions of drying and sorting, aimed at improving the treatment efficiency and quality of Chinese herbal medicine
Leaf and stem of Chinese medicinal materials
-
Drum cleaning machine
The working principle of the drum cleaning machine is mainly to use the rotating movement of the drum, to make the material roll inside the drum, friction with each other, so as to achieve the purpose of cleaning the surface of the material.
-
Intelligent micro-negative pressure drying room
Intelligent micro negative pressure drying room is a kind of equipment that uses vacuum negative pressure technology to dry goods.
-
Cutting machine
COPYRIGHT © 2024 SICHUAN JIENENG DRYER EQUIPMENT CO., LTD. ALL RIGHT RESERVED. POWERED BY: 300.CN
Website